andorra – Sawant Process Solutions

High pressure reactor andorra

“andorra” comes from the small autoclave family – a development in autoclave construction based on many years of experience and perfected. Reactor “andorra” has the technology that is otherwise only found in large reactors: Seals have been severely limited, thanks to the prudent design to merge the reactor lid with the core piece of the magnetic stirrer drive and the magnetic stirrer drive in turn has, in addition to the essential valve connections, a pressure measurement and the pressure protection.

Specifications

Nominal volume ml: 60, 100
Working volume ml: 20-40, 40-60
Working pressure bar: 200, 280, 480
Working temperature °C: 200, 250, 300
Material WNr. 1.4435 at 200 bar - WNr. 2.4602 at 250 bar - WNr. 1.4980 at 280 bar
Union nut as lock M48 x1.5 mm, width across flats SW55
Double sealed: O-ring and medium seal metal to metal (cutting ring).
Reactor cover resp. magnetic stirrer drive with a torque of 20 Ncm and integrated micromotor 24V/DC
Output speed with ball bearing 0-1'300 rpm, with plain bearing 0-1'200 rpm.
Regulating shut-off valve for gas supply
Regulating shut-off valve for pressure relief
Regulating shut-off valve with immersion tube for sampling
Pressure gauge in chemical version
Bursting disc holder equipped with bursting disc
Immersion tube for thermocouple with ø 3 mm (without thermocouple)
Temperature sensor Pt100 or type K suitable
Stirring element: gas supply stirrer ø 18 x 64 mm

A real team player!

“andorra” is a real team player when it comes to multi-versions of four, eight or more autoclaves in series. The small autoclaves can easily be used in multiple reactions, where they are heated, cooled or controlled independently.

Variants/special features

Pressure stages: 200, 250 or 480 bar depending on the choice of material.
Temperature stages °C: 200, 250, 300 depending on the choice of material.
Material for wetted parts WNr.: 1.4435 (AISI 316L), 2.4602 (HC22) and 1.4980 (AISI 660) as standard. Versions in Hastelloy C276, B3 or titanium size 2 on request.
The autoclave vessel is double-sealed: once in the upper area by an O-ring made of Viton, EPDM or Kalrez and at the bottom via a metal-to-metal medium seal (cutting ring).
Temperature sensor Pt1000, type K or type N in the immersion tube for measuring the medium temperature (not included in delivery).
By opening the locking nut SW12 mm, the output shaft can be removed for cleaning the inside or bearing replacement. Either ball bearings or plain bearings are used, depending on the medium or material used.

Article No	Vol. ml	Pres PS bar	Temp. TS C°	Pres PA bar	Temp. PA C°	Mat. WNr.	Sensor / Heating	Drive / Version	L x W x H mm
129908	60	250	225	200	200	1.4435	Type K, electric	3 regulating valves	185 x 185 x 536
129919	60	250	225	200	200	1.4435	1 x Pt100, 4 wires	3 regulating valves	185 x 185 x 536
132348	60	350	275	280	250	2.4602	Type K, electric	3 regulating valves	185 x 227 x 536
132353	60	350	275	280	250	2.4602	1 x Pt100, 4 wires	3 regulating valves	185 x 227 x 536
132346	60	600	325	480	300	1.4980	Type K, electric	3 regulating valves	185 x 227 x 536
132354	60	600	325	480	300	1.4980	1 x Pt100, 4 wires	3 regulating valves	185 x 227 x 536
129910	100	250	225	200	200	1.4435	Type K, electric	3 regulating valves	185 x 185 x 575
129920	100	250	225	200	200	1.4435	1 x Pt100, 4 wires	3 regulating valves	185 x 185 x 575
132349	100	350	275	280	250	2.4602	Type K, electric	3 regulating valves	185 x 227 x 536
132352	100	350	275	280	250	2.4602	1 x Pt100, 4 wires	3 regulating valves	185 x 227 x 536
132342	100	600	325	480	300	1.4980	Type K, electric	3 regulating valves	185 x 227 x 536
132355	100	600	325	480	300	1.4980	1 x Pt100, 4 wires	3 regulating valves	185 x 227 x 536

High pressure reactor andorra

Specifications

A real team player!

Variants/special features

Related Products

avalon

avalon plus

vivor

apart